InteliMains 210 Global Guide
114
Weekly mode
Set-up via InteliConfig
To set-up timer via InteliConfig go to the setpoint ribbon, setpoint group scheduler and setpoint
Timer 1 Setup
.
Note:
First of all function of timer has to be adjusted via setpoint
Image 5.40 Weekly mode - InteliConfig
In timer mode select Repeat. In repetition type select Weekly. In timer settings adjust date and time of first
occurrence of timer. Also adjust the duration of each occurrence of timer. Than select the x-th week of repetition
Timer 1 Refresh Period (page 253)
) and days when timer should be active (
).
Example:
On image example first start of timer will be 1/1/2016 at 12:00. Duration will be 1 hour. Timer will
be again activated every 2nd week on Monday, Wednesday and Friday at 12:00 for 1 hour.
Set-up via controller interface
In controller go to the Scheduler setpoint group. Select the function of timer via
setpoint. Than go to
Timer 1 Setup
and press enter button. In
setpoint select
Repeated mode. Than adjust
Timer 1 First Occur. Date (page 251)
Timer 1 First Occur. Time (page 251)
and
. In setpoint
select Weekly and adjust
(days when timer should be active) and
Timer 1 Refresh Period (page 253)
(x-th week of repetition).
Note:
Use left and right buttons to move between timer setpoints.
Monthly mode
Set-up via InteliConfig
To set-up timer via InteliConfig go to the setpoint ribbon, setpoint group scheduler and setpoint
Timer 1 Setup
.
Note:
First of all function of timer has to be adjusted via setpoint
