Page 73
G
10
3. Secure the cable with retaining nut (22) and washer (23) on each side of the shifter cable support
bracket at the forward and reverse assembly (Figure 10-107).
4. Install the ball joint socket (20) on the shifter lever ball stud (19) on the transaxle (Figure 10-107).
5. Install the ball joint socket (2) on the forward and reverse shifter assembly ball stud (3) (Figure 10-107).
ADJUSTMENT OF THE FORWARD AND REVERSE SHIFTER CABLE
With the shifter lever of the transmission in the neutral position (Figure 10-106, Page 71), the forward and
reverse handle (21) (Figure 10-107) should be straight up. For minor adjustments, the nut (1) may be loos-
ened and the ball joint (2) rotated in the proper direction to get proper adjustment (Figure 10-107).
For major adjustments, the cable retaining nuts (22) (Figure 10-107) must be loosened and adjusted. When
the cable is properly adjusted, with the forward and reverse handle (21) (Figure 10-107) in the neutral posi-
tion, the shift lever of the transmission will be in the neutral position (Figure 10-106, Page 71).
• BE SURE THREADS OF CABLE ARE ENGAGED IN BALL JOINT AT LEAST .25 INCH (6.35 MILLI-
METERS). IF BALL JOINT COMES LOOSE FROM THE CABLE, THE FORWARD AND REVERSE
SHIFTER WILL NOT OPERATE PROPERLY.
CAUTION
Summary of Contents for 1997 DS
