Page 94
12
G
Circuit Testing, Continued:
TEST PROCEDURES
Test Procedure 1 - Fuse:
The fuse (red 10 amp) is located in the electrical component box (Figure 12-2, Page 83).
1. Place the neutral lock-out cam in the SERVICE position, put the forward and reverse lever in the NEU-
TRAL position, and chock the wheels.
• WHEN MAKING ELECTRICAL TESTS OR REPAIRS, ALWAYS:
- WEAR SAFETY GLASSES OR APPROVED EYE PROTECTION.
- REMOVE THE KEY.
- PUT THE FORWARD AND REVERSE SWITCH IN NEUTRAL.
- DISCONNECT THE BATTERY AS SHOWN (FIGURE 12-1, PAGE 82).
• FOLLOW ALL PROCEDURES EXACTLY AS INSTRUCTED.
• SEE THE SAFETY WARNINGS ON PAGE 81.
FIGURE 12-18
WARNING
CHECK NEUTRAL
LOCK-OUT LIMIT SWITCH
(TEST PROCEDURE 6)
CHECK CONNECTION
OF BLACK WIRE
INCORRECT
CONTINUITY READING
CORRECT
CONTINUITY READING
WIRE INCORRECTLY
CONNECTED
WIRE CORRECTLY
CONNECTED
REPLACE LIMIT SWITCH
RECONNECT WIRE
REPLACE WIRE
CHECK CONTINUITY
OF BLACK WIRE
(TEST PROCEDURE 8)
NO CONTINUITY
ENGINE WILL CRANK
WHEN SHIFTER IS
IN NEUTRAL POSITION
Summary of Contents for 1997 DS
