![background image](http://html1.mh-extra.com/html/club-car/1997-ds/1997-ds_maintenance-service-supplement_2626738080.webp)
Page 72
10
G
Removal of the Forward and Reverse Shifter Cable, Continued:
2. Remove the ball joint socket (20) from the shifter arm ball stud (19) on the transaxle (Figure 10-107).
3. Loosen the retaining nuts (22) on both ends of the cable (Figure 10-107).
4. Remove cable from the vehicle.
INSTALLATION OF THE FORWARD AND REVERSE SHIFTER CABLE
1. From the forward and reverse switch, route the cable toward the driver side of the vehicle so that it lies
against the side of the front body and runs between the battery and intake expansion chamber, turns
90°, runs over the fender and then turns again in front of the rear post of the body support to connect
with the shifter arm on the transaxle (Figure 10-105, Page 71).
2. Secure the cable with retaining nut (22) and washer (23) on each side of the shifter cable support
bracket at the transaxle (Figure 10-107).
FIGURE 10-107
ClubCar
19
20
2
21
1
4
22
22
REFERENCE -
TRANSMISSION
SHIFTER LEVER
REFERENCE -
TRANSMISSION
CABLE SUPPORT
BRACKET
22
22
23
23
3
Summary of Contents for 1997 DS
