Chrysler Grand Caravan 2022 Owner'S Manual Download Page 80

Page: 80 / 316

GETTING TO KNOW YOUR VEHICLE

The Stow ‘N Place roof rack does not increase the

total load carrying capacity of the vehicle. Be sure

the total load of cargo inside the vehicle plus that

on the external rack does not exceed the maximum

vehicle load capacity.

EPLOYING

ROSSBARS

1. To deploy the crossbars, completely loosen

the thumb screws at both ends of the

crossbar and lift the crossbar from its stowed

position in the side rail. Repeat with crossbar

on the opposite side.

Thumb Screw

NOTE:

The thumb screws cannot be fully removed.

Removing Crossbars

2. Bend the crossbar supports at each end,

taking care to keep hand clear of pivoting joint.

Slide the thumb screw down.

Bending Pivot

3. Position the crossbars across the roof making

sure the letters on the crossbars align with the

matching letters on the side rail.

CAUTION!

Use care when removing and handling the

crossbars to prevent damage to the vehicle.

22_RUVG_OM_EN_USC_t.book Page 78

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands