Chrysler Grand Caravan 2022 Owner'S Manual Download Page 33

Page: 33 / 316

GETTING TO KNOW YOUR VEHICLE

4. Once the latches are released, tilt the entire

seat toward the front of the vehicle. The seat

can now be removed through either sliding

side door, or through the liftgate.

Tilt Bench Seat Forward

NOTE:



Due to the weight of the bench seat, it is recom

mended that two people are utilized for its

removal.



When storing the removed bench seat, it is

important to keep the seatback in the folded

position.

Reinstalling The Bench Seat
1. To reinstall the bench seat, align the seats

front attachments into the detent positions

on the floor.

2. Tilt seat rearward to lock the seatback into its

original position.

NOTE:

Push downward to ensure the rear latches are in

the locked position.
3. Lift the recline handle and return the seatback

to the seating position.

Second Row Removable 8th Seat —

If Equipped

While the 8th seat does not stow in the floor, it is

foldable and removable for added cargo space.

Second Row 8th Seat Fold Flat Strap

The release strap is located on the front of the

seat, near the floor. To remove the seat, pull the

release strap to release the rear latches. The seat

assembly can now be removed from the vehicle by

moving it in a rearward direction from the detent

positions in the floor.

Release Strap

WARNING!

If not properly latched, the seat could become

loose. Personal injuries could result.

22_RUVG_OM_EN_USC_t.book Page 31

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands