Chrysler Grand Caravan 2022 Owner'S Manual Download Page 72

Page: 72 / 316

GETTING TO KNOW YOUR VEHICLE

NOTE:

Two devices can be plugged in at the same time,

and both ports will provide charging capabilities.

Only one port can transfer data to the system at a

time. A pop-up will appear and allow you to select

the device transferring data.
For example, if a device is plugged into the Type A

USB port and another device is plugged into the

Type C USB port, a message will appear and allow

you to select which device to use.

Front Center Stack AUX Jack And USB Ports

There are multiple USB “Charge Only” ports in this

vehicle.



On the back of the front row seats (if equipped).



Above the rear cup holder in the third row seats

(if equipped).

Rear Seat USB Charging Port

3rd Row USB Charging Port

NOTE:

The USB “Charge Only” ports will recharge battery

operated USB devices when connected.
Different scenarios are listed below when a

non-phone device is plugged into the smaller and

larger USB ports, and when a phone device is

plugged into the smaller and larger USB ports:



“A new device is now connected. Previous

connection was lost”.



“(Phone Name) now connected. Previous

connection was lost”.



“Another device is in use through the same USB

port. Please disconnect the first device to use

the second device”.

Plugging in a phone or another USB device may

cause the connection to a previous device to be

lost.

OWER

UTLETS

Your vehicle is equipped with 12 Volt (15 Amp)

power outlets, and 5 Volt (2.5 Amp) USB ports, that

can be used to power cellular phones, small

electronics and other low powered electrical

accessories.

1 — Type C And Type A USB Ports 1
2 — Type C And Type A USB Ports 2
3 — AUX Port

22_RUVG_OM_EN_USC_t.book Page 70

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands