Chrysler Grand Caravan 2022 Owner'S Manual Download Page 240

Page: 240 / 316

238

IN CASE OF EMERGENCY

MANUAL PARK RELEASE

To move the vehicle in cases where the

transmission will not shift out of PARK (P) (such as

a depleted battery), a Manual Park Release is

available.

Manual Park Release Access Cover

Follow These Steps To Activate The Manual Park

Release:
1. Apply firm pressure to the brake pedal while

seated in the driver’s seat.

2. Apply the parking brake, if possible.
3. Using a small screwdriver or similar tool,

remove the Manual Park Release access

cover, which is to the lower left of the steering

column.

4. The Manual Park Release access cover is

connected to a red tether strap. Pull the tether

strap out as far as it will go, then release it. The

transmission should now be in NEUTRAL (N),

allowing the vehicle to be moved.

Tether Strap

NOTE:

When the lever is locked in the released position,

the tether will remain outside of the trim panel and

the access cover cannot be reinstalled.
5. Release the parking brake only when the

vehicle is securely connected to a tow vehicle.

To Reset The Manual Park Release:
1. Apply firm pressure to the brake pedal while

seated in the driver’s seat.

2. Pull the tether strap out again, then release it.
3. Allow the tether to retract with the lever back

to its original position.

4. Verify that the transmission is in PARK (P).
5. Confirm that the tether has retracted fully

and re-install the access cover. If the access

cover cannot be re-installed, repeat steps 1

through 4.

WARNING!

You should be seated in the driver’s seat with

your foot firmly placed on the brake pedal to

maintain control of the vehicle before activating

the Manual Park Release. If possible, you should

apply the parking brake. Activating the Manual

Park Release will allow your vehicle to roll away if

it is not secured or properly connected to a tow

vehicle. Activating the Manual Park Release on

an unsecured vehicle could lead to serious

injury or death for those in or around the vehicle.

22_RUVG_OM_EN_USC_t.book Page 238

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands