Chrysler Grand Caravan 2022 Owner'S Manual Download Page 74

Page: 74 / 316

GETTING TO KNOW YOUR VEHICLE

Power Outlet Fuse Locations

WINDOWS

OWER

INDOWS

The window switches on the driver’s door trim

panel control all of the door windows.

Driver’s Power Window Controls

The driver may lock out the rear power windows by

pushing the bar control just below the power

window controls.

Power Window Lockout Switch

The window switches will operate only when the

ignition is in the ON/RUN or ACC position and

during power accessory delay.

1 — F95A (Ignition)/F95B (Battery) Front Power

Outlet 10A (If Equipped)
2 — F85 Cigar Lighter 20A
3 — F60 RR Cargo Power Outlet 20A

WARNING!

To avoid serious injury or death:



Only devices designed for use in this type of

outlet should be inserted into any 12 Volt

outlet.



Do not touch with wet hands.



Close the lid when not in use and while driving

the vehicle.



If this outlet is mishandled, it may cause an

electric shock and failure.

CAUTION!



Many accessories that can be plugged in draw

power from the vehicle's battery, even when

not in use (i.e., cellular phones, etc.). Eventu

ally, if plugged in long enough, the vehicle's

battery will discharge sufficiently to degrade

battery life and/or prevent the engine from

starting.



Accessories that draw higher power (i.e.,

coolers, vacuum cleaners, lights, etc.) will

degrade the battery even more quickly. Only

use these intermittently and with greater

caution.



After the use of high power draw accessories,

or long periods of the vehicle not being started

(with accessories still plugged in), the vehicle

must be driven a sufficient length of time to

allow the generator to recharge the vehicle's

battery.

22_RUVG_OM_EN_USC_t.book Page 72

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands