Chrysler Grand Caravan 2022 Owner'S Manual Download Page 66

Page: 66 / 316

GETTING TO KNOW YOUR VEHICLE

BLOWER CONTROL

Blower Control is used to regulate the

amount of air forced through the Climate

Control system. There are seven blower

speeds available. Adjusting the blower

causes automatic mode to switch to manual

operation. The speeds can be selected using the

buttons on the touchscreen.

PANEL MODE

Press this button on the touchscreen to

change the air distribution mode to Panel

Mode. In Panel Mode, air comes from the

outlets in the headliner. Each of these

outlets can be individually adjusted to direct the

flow of air. Moving the air vanes of the outlets to

one side will shut off the airflow.

BI-LEVEL MODE

Press this button on the touchscreen to

change the air distribution mode to

Bi-Level Mode. In Bi-Level Mode, air

comes from the headliner outlets and

floor outlets.

NOTE:

Bi-Level Mode is designed under comfort condi

tions to provide cooler air out of the panel outlets

and warmer air from the floor outlets.

FLOOR MODE

Press this button on the touchscreen to

change the air distribution mode to Floor

Mode. In Floor Mode, air comes from the

floor outlets.

REAR PASSENGER CLIMATE CONTROL OFF

BUTTON

Press and release this button to turn the

Rear Climate Controls off.

Rear Manual Temperature Control (MTC)

The rear Manual Temperature Control (MTC)

system has floor air outlets at the rear right side of

the third row seats and overhead outlets at each

outboard rear seating position. The system

provides heated air through the floor outlets or

cool, dehumidified air through the headliner

outlets.

The rear system temperature control buttons are

located on the headliner on the passenger side of

the vehicle.

Rear Manual Climate Controls

CAUTION!

Interior air enters the Rear Automatic

Temperature Control system through an intake

grille, located in the floor under the passengers’

seats. Do not block or place objects directly in

front of the inlet grille or heater outlets. The

electrical system could overload causing

damage to the blower motor.

22_RUVG_OM_EN_USC_t.book Page 64

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands