Chrysler Grand Caravan 2022 Owner'S Manual Download Page 181

Page: 181 / 316

SAFETY

179

Adjustable Upper Shoulder Belt Anchorage

In the front and second row outboard seats the

shoulder belt can be adjusted upward or

downward to position the seat belt away from your

neck. Push or squeeze the anchorage button to

release the anchorage, and move it up or down to

the position that serves you best.

Adjustable Anchorage

As a guide, if you are shorter than average, you will

prefer the shoulder belt anchorage in a lower

position, and if you are taller than average, you will

prefer the shoulder belt anchorage in a higher

position. After you release the anchorage button,

try to move it up or down to make sure that it is

locked in position.

NOTE:

The adjustable upper shoulder belt anchorage is

equipped with an Easy Up feature. This feature

allows the shoulder belt anchorage to be adjusted

in the upward position without pushing or

squeezing the release button. To verify the

shoulder belt anchorage is latched, pull downward

on the shoulder belt anchorage until it is locked

into position.

Second Row Center (If Equipped) And Third

Row Center Seat Belt Operating

Instructions

The second row center (if equipped) and third row

center seat belts feature a seat belt with a

mini-latch plate and buckle, which allows the seat

belt to detach from the lower anchor when the seat

is folded. The mini-latch plate and regular latch

plate can then be stored out of the way in the

headliner for added convenience to open up

utilization of the storage areas behind the front

seats when the seat is not occupied.
1. Remove the mini-latch plate and regular latch

plate from its stowed position in the headliner

slightly behind the second or third row seat.

Mini-Latch Stowage

WARNING!



Wearing your seat belt incorrectly could make

your injuries in a collision much worse. You

might suffer internal injuries, or you could

even slide out of the seat belt. Follow these

instructions to wear your seat belt safely and

to keep your passengers safe, too.



Position the shoulder belt across the shoulder

and chest with minimal, if any slack so that it

is comfortable and not resting on your neck.

The retractor will withdraw any slack in the

shoulder belt.



Misadjustment of the seat belt could reduce

the effectiveness of the safety belt in a crash.



Always make all seat belt height adjustments

when the vehicle is stationary.

22_RUVG_OM_EN_USC_t.book Page 179

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands