Chrysler Grand Caravan 2022 Owner'S Manual Download Page 107

Page: 107 / 316

STARTING AND OPERATING

105

UTO

ARK

AutoPark is a supplemental feature to assist in

placing the vehicle in PARK if the situations below

occur. It is a back-up system and should not be

relied upon as the primary method by which the

driver shifts the vehicle into PARK.
The conditions under which AutoPark will engage

are outlined on the following pages.

ALWAYS DO A VISUAL CHECK that your vehicle is in

PARK by looking for the “P” in the instrument

cluster display and on the gear selector. As an

added precaution, always apply the parking brake.
If the vehicle is not in PARK and the driver

attempts to turn off the engine, if certain

conditions are met, the vehicle will AutoPark,

automatically shifting the vehicle’s transmission to

the PARK position. The gear selector will

automatically reset itself to the PARK position. The

vehicle’s ignition will then move to the OFF position

(engine off). When AutoPark is activated the

instrument cluster will display the message

“AutoPark Engaged”.
AutoPark will engage when all of these conditions

are met:



Vehicle is equipped with a gear selector



Vehicle is not in PARK



Vehicle speed is 1.2 mph (1.9 km/h) or less



Driver has pushed the ENGINE START/STOP

button

If the vehicle is not in PARK and the driver exits the

vehicle with the engine running, if certain

conditions are met, the vehicle will AutoPark,

automatically shifting the vehicle’s transmission to

the PARK position. The Electric Park Brake SAFE

HOLD feature will also activate in some conditions

page 111.

AutoPark will engage when all of these conditions

are met:



Vehicle is equipped with a gear selector



Vehicle is not in PARK



Vehicle speed is 1.2 mph (1.9 km/h) or less



Driver’s door is ajar



Driver’s seat belt is unbuckled



Brake pedal is not pressed

The message “AutoPark Engaged” will display in

the instrument cluster.

WARNING!



Driver inattention could lead to failure to place

the vehicle in PARK. ALWAYS DO A VISUAL

CHECK that your vehicle is in PARK by verifying

that a solid (not blinking) “P” is indicated in

the instrument cluster display and near the

gear selector. If the "P" indicator is blinking,

your vehicle is not in PARK. As an added

precaution, always apply the parking brake

when exiting the vehicle.



AutoPark is a supplemental feature. It is not

designed to replace the need to shift your

vehicle into PARK. It is a back-up system and

should not be relied upon as the primary

method by which the driver shifts the vehicle

into PARK.

CAUTION!

Engine will remain running.

22_RUVG_OM_EN_USC_t.book Page 105

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands