Chrysler Grand Caravan 2022 Owner'S Manual Download Page 70

Page: 70 / 316

GETTING TO KNOW YOUR VEHICLE

(Continued)

1. To access the storage bins with front seats in

the rearward position, place the lock rod in

the unlocked position so the load floor can

fold upwards towards the seatback.

Lock Rod

NOTE:



Push the lock rod inward for the locked

position.



Pull outward on the lock rod for the

unlocked position.

2. Pull the latch located near the second row seat

to open the floor panel.

Floor Latch

STORAGE BIN SAFETY WARNING

Carefully follow these warnings to help prevent

personal injury or damage to your vehicle:

WARNING!

In a collision, serious injury could result if the

seat storage bin covers are not properly latched.



Do not drive the vehicle with the storage bin

covers open.



Keep the storage bin covers closed and

latched while the vehicle is in motion.



Do not operate the storage bin covers while

the vehicle is in motion.



Do not use a storage bin latch as a tie down.

CAUTION!

The storage bin cover must lay flat and be

latched to avoid damage from contact with the

front seat tracks, which have minimal clearance

to the cover. If the storage bin cover is left in the

open position, front seat adjustment may

damage the cover.

WARNING!



Always close the storage bin covers when your

vehicle is unattended.



Do not allow children to have access to the

second row seat storage bins. Once in the

storage bin, young children may not be able to

escape. If trapped in the storage bin, children

can die from suffocation or heat stroke.



In a collision, serious injury could result if the

seat storage bin covers are not properly

latched.



Do not drive the vehicle with the storage bin

covers open. Keep the storage bin covers

closed and latched while the vehicle is in

motion.

22_RUVG_OM_EN_USC_t.book Page 68

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands