Chrysler Grand Caravan 2022 Owner'S Manual Download Page 30

Page: 30 / 316

GETTING TO KNOW YOUR VEHICLE

ANUAL

DJUSTMENT

RONT

EATS

)

— I

QUIPPED

Manual Front Adjuster

Both front seats are adjustable forward or

rearward. The manual seat adjustment handle is

located under the seat cushion at the front edge of

each seat.

Manual Seat Adjustment

While sitting in the seat, pull up on the handle and

slide the seat forward or rearward. Release the bar

once you have reached the desired position. Then,

using body pressure, move forward and rearward

on the seat to be sure that the seat adjusters have

latched.

Manual Seat Height Adjustment

The driver’s seat height can be raised or lowered

by using a lever, located on the outboard side of

the seat. Pump the lever upward to raise the seat

height or pump the lever downward to lower the

seat height.

Manual Front Seat Recline Adjustment

For models equipped with manual seats, the

recline lever is located on the outboard side of the

seat.
To recline, lean forward slightly, lift the lever and

push back to the desired position and release the

lever. Lean forward and lift the lever to return the

seatback to its normal position. Using body

pressure, lean forward and rearward on the seat to

be sure the seatback has latched.



Do not allow people to ride in any area of your

vehicle that is not equipped with seats and

seat belts. In a collision, people riding in these

areas are more likely to be seriously injured or

killed.



Be sure everyone in your vehicle is in a seat

and using a seat belt properly.

WARNING!



Adjusting a seat while the vehicle is moving is

dangerous. The sudden movement of the seat

could cause you to lose control. The seat belt

might not be adjusted properly and you could

be injured. Adjust the seat only while the

vehicle is parked.



Do not ride with the seatback reclined so that

the shoulder belt is no longer resting against

your chest. In a collision you could slide under

the seat belt and be seriously or even fatally

injured. Use the recliner only when the vehicle

is parked.

WARNING!

1 — Forward/Rearward Adjustment Handle
2 — Height Adjustment
3 — Recline Lever

WARNING!



Adjusting a seat while driving may be

dangerous. Moving a seat while driving could

result in loss of control which could cause a

collision and serious injury or death.



Seats should be adjusted before fastening the

seat belts and while the vehicle is parked.

Serious injury or death could result from a

poorly adjusted seat belt.

22_RUVG_OM_EN_USC_t.book Page 28

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands