Chrysler Grand Caravan 2022 Owner'S Manual Download Page 244

Page: 244 / 316

242

IN CASE OF EMERGENCY

If you must use the accessories (wipers,

defrosters, etc.) while being towed, the ignition

must be in the ON/RUN mode, not the ACC mode.

NOTE:

The Safehold feature will engage the Electric Park

Brake whenever the driver's door is opened (if the

ignition is ON, transmission is not in PARK, and

brake pedal is released). If you are towing this

vehicle with the ignition in the ON/RUN mode, you

must manually disable the Electric Park Brake

each time the driver's door is opened, by pressing

the brake pedal and then releasing the EPB.
If the key fob is unavailable or the vehicle's battery

is discharged, detailed instructions on shifting the

transmission out of PARK in order to move the

vehicle

page 238.

ENHANCED ACCIDENT RESPONSE SYSTEM

(EARS)

This vehicle is equipped with an Enhanced

Accident Response System.
This feature is a communication network that

takes effect in the event of an impact

page 195.

EVENT DATA RECORDER (EDR)

This vehicle is equipped with an event data

recorder (EDR). The main purpose of an EDR is to

record data that will assist in understanding how a

vehicle’s systems performed under certain crash

or near crash-like situations, such as an air bag

deployment or hitting a road obstacle

page 196.

Recovery load should:



Be applied at constant speed.



Be applied parallel to the center line of the

length of the vehicle.



Not be an abrupt acceleration.



Be applied at constant speed.



Be applied parallel to the center line of the

length of the vehicle.



Not be an abrupt acceleration.

CAUTION!



Do not use sling-type equipment when towing.

Vehicle damage may occur.



When securing the vehicle to a flatbed truck,

do not attach to front or rear suspension

components. Damage to your vehicle may

result from improper towing.



Ensure that the Electric Park Brake is

released, and remains released, while being

towed.

22_RUVG_OM_EN_USC_t.book Page 242

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands