Chrysler Grand Caravan 2022 Owner'S Manual Download Page 90

Page: 90 / 316

GETTING TO KNOW YOUR INSTRUMENT PANEL

NSTRUMENT

LUSTER

ISPLAY

ENU

TEMS

The instrument cluster display can be used to view

the main menu items for several features. Use the
up and down arrow buttons to scroll through

the driver interactive display menu options until

the desired menu is reached

page 86.

NOTE:

The instrument cluster display menu items display

in the center of the instrument cluster. Menu items

may vary depending on your vehicle features.

Speedometer

Push and release the up or down arrow

button until Speedometer is highlighted in the

instrument cluster display. Push and release the

OK button to toggle between MPH and km/h.

Vehicle Info

Push and release the up or down arrow

button until Vehicle Info is highlighted in the
instrument cluster display. Push the left or
right arrow button to scroll through the following

information submenus:

Setting

Instrument Cluster Display Message

None – With vehicle ignition ON

“KeySense in use. Max vehicle speed set to xx MPH/or km/h”

Max Vehicle Speed



“Max speed reached. KeySense in use” supported by a chime



“Approaching max speed xx MPH/km/h” supported by a chime

Start Up Fuel Alert message

“Range to empty xxx miles or km”

Early Low Fuel Alert Message

“Fuel Low”

ParkSense

“Feature cannot be disabled. KeySense in use”

Blind Spot

“Feature cannot be disabled. KeySense in use”

Forward Collision Warning

“Feature cannot be disabled. KeySense in use”

22_RUVG_OM_EN_USC_t.book Page 88

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands