Chrysler Grand Caravan 2022 Owner'S Manual Download Page 291

Page: 291 / 316

SERVICING AND MAINTENANCE

289

When cleaning extremely dirty wheels including

excessive brake dust, care must be taken in the

selection of tire and wheel cleaning chemicals and

equipment to prevent damage to the wheels.

Mopar® Wheel Treatment or Mopar® Chrome

Cleaner or their equivalent is recommended or

select a non-abrasive, non-acidic cleaner for

aluminum or chrome wheels.

NOTE:

If you intend parking or storing your vehicle for an

extended period after cleaning the wheels with

wheel cleaner, drive your vehicle and apply the

brakes to remove the water droplets from the

brake components. This activity will remove the

red rust on the brake rotors and prevent vehicle

vibration when braking.
Dark Vapor Chrome, Black Satin Chrome, or Low

Gloss Clear Coat Wheels

NOW

RACTION

EVICES

Use of traction devices require sufficient

tire-to-body clearance. Due to limited clearance,

the following snow traction devices are

recommended. Follow these recommendations to

guard against damage:



Snow traction device must be of proper size for

the tire, as recommended by the snow traction

device manufacturer.



No other tire sizes are recommended for use

with the snow traction device.



Please follow the table below for the recom

mended tire size, axle and snow traction device:

CAUTION!

Do not use scouring pads, steel wool, a bristle

brush, metal polishes or oven cleaner. These

products may damage the wheel's protective

finish. Such damage is not covered by the New

Vehicle Limited Warranty. Only car wash soap,

Mopar® Wheel Cleaner or equivalent is

recommended.

CAUTION!

If your vehicle is equipped with these specialty

wheels, DO NOT USE wheel cleaners, abrasives,

or polishing compounds. They will permanently

damage this finish and such damage is not

covered by the New Vehicle Limited Warranty.

HAND WASH ONLY USING MILD SOAP AND

WATER WITH A SOFT CLOTH. Used on a regular

basis; this is all that is required to maintain this

finish.

FWD

Trim Level

Axle

Tire/Wheel Size

Snow Traction Device (maximum

projection beyond tire profile or

equivalent)

LXI

Front

235/65R17

9 mm Cable/Chain

22_RUVG_OM_EN_USC_t.book Page 289

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands