Chrysler Grand Caravan 2022 Owner'S Manual Download Page 154

Page: 154 / 316

152

MULTIMEDIA

Sound Horn With Lock

This setting will sound the horn when the Lock button is pushed on the key

fob. The “Off” setting will not sound the horn when the Lock button is pushed.

The “1st Press” setting will sound the horn when the Lock button is pushed

once. The “2nd Press” setting will sound the horn when the Lock button is

pushed twice.

Sound Horn With Remote Start

This setting will sound the horn when the remote start is activated from the

key fob.

Remote Door Unlock, Door Lock/1st Press Of Key Fob Unlocks

This setting will change how many pushes of the Unlock button on the key fob

are needed to unlock all the doors. The “Driver Door” setting will only unlock

the driver door on the first push on the Unlock button. The “All Doors” setting

will unlock all doors with only one push of the Unlock button.

Passive Entry

This setting will allow you to turn the Passive Entry feature (Keyless

Enter-N-Go™) on or off.

Personal Settings Linked To Key Fob

This setting will recall preset radio stations and driver seat position that have

been linked to the key fob.

Power Liftgate Alert

This setting will chime an audible alert when the power liftgate is raising or

lowering. Selectable options are “On” and “Off”.

Sliding Door Alert

This setting will chime an audible alert when the sliding door reverses or

sense an obstacle. Selectable options are “On” and “Off”.

Flash Lights with Sliding Door

This setting will flash the lights when the sliding door is opening. Selectable

options are “On” and “Off”.

Setting Name

Description

22_RUVG_OM_EN_USC_t.book Page 152

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands