Chrysler Grand Caravan 2022 Owner'S Manual Download Page 226

Page: 226 / 316

224

IN CASE OF EMERGENCY

Jack Locations

Front Lifting Point

Front Jack Location

Rear Lifting Point

Rear Jacking Location

WARNING!

Being under a jacked-up vehicle is dangerous.

The vehicle could slip off the jack and fall on

you. You could be crushed. Never get any part of

your body under a vehicle that is on a jack. If you

need to get under a raised vehicle, take it to a

service center where it can be raised on a lift.

CAUTION!

Do not attempt to raise the vehicle by jacking on

locations other than those indicated.

22_RUVG_OM_EN_USC_t.book Page 224

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands