Chrysler Grand Caravan 2022 Owner'S Manual Download Page 71

Page: 71 / 316

GETTING TO KNOW YOUR VEHICLE

SEAT STORAGE BIN COVER EMERGENCY

RELEASE LEVER

As a security measure, the Seat Storage Bin Cover

has an Emergency Release Lever built into the

latching mechanism.

Storage Bin Cover Emergency Release Lever

NOTE:

In the event of an individual being locked inside

the storage bin, the storage bin cover can be

opened from inside of the bin by pushing on the

glow-in-the-dark lever attached to the storage bin

cover latching mechanism.

CREENS

— I

QUIPPED

Sun screens are available for second row seating

windows. The screens store in the sill trim panels,

and the tops of the windows are equipped with

hooks that the sun screens attach to when pulled

out.
Gently pull up on the tab to raise the sun screen.

Continue pulling the sun screen until the tab is

near the top of the window.

Once the screen is completely to the top of the

window, extend the top bar of the sun screen over

the two hooks attached to the top of the window.

Sun Screen Extended

To lower the sun screen, gently lift the tab upward

to disengage the hooks, and feed the screen back

into the base sill.

USB/AUX C

ONTROL

There are numerous USB ports located throughout

the vehicle that allow an external USB device to be

plugged into the USB port. There are four, fully

functional USB ports: Two Mini-USBs (Type C) and

two Standard USBs (Type A). There is also an AUX

port located between the USB ports.



Do not operate the storage bin covers while

the vehicle is in motion.



Do not use a storage bin latch as a tie down.

CAUTION!

The storage bin cover must lay flat and be

latched to avoid damage from contact with the

front seat tracks, which have minimal clearance

to the cover. If the storage bin cover is left in the

open position, front seat adjustment may

damage the cover.

WARNING!

22_RUVG_OM_EN_USC_t.book Page 69

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands