Chrysler Grand Caravan 2022 Owner'S Manual Download Page 35

Page: 35 / 316

GETTING TO KNOW YOUR VEHICLE

Lift Easy Tilt Seat Lever (If Equipped)

Pull Easy Tilt Seat Handle (If Equipped)

3. Push on seatback to slide seat forward to

access the third row.

Easy Tilt Seat

Easy Tilt With Child Seat Installed

4. To put the seat back into original position, just

pull back on the seatback and lock the seat

into position.

Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more

accessibility for passengers to enter and exit the

third row.
1. Without a child seat installed, you can fold the

seat by pulling the recliner handle on the

bottom part of the seat. Before pulling the

recliner lever, make sure the arm rests are

folded up.

Recliner Lever

WARNING!

Do not use this feature with a child in seat.

Serious injury or death may occur.

22_RUVG_OM_EN_USC_t.book Page 33

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands