Chrysler Grand Caravan 2022 Owner'S Manual Download Page 211

Page: 211 / 316

SAFETY

209

NOTE:

If the folding, non-adjustable head restraint inter

feres with the installation of the child restraint, the

head restraint may be folded and the child seat

installed in front of it.

Car Seat With Head Restraint Folded

Can the rear head restraints be removed?

Yes

The 2nd row head restraints on bench and the

center head restraint in the 8 passenger vehicle

can be removed if they interfere with the

installation of the child restraint. 2nd row Stow 'n

Go head restraints are not removable. The 3rd row

center head restraint is removable in all vehicles,

but the 3rd row outboard head restraints are not

removable

page 44.

Can the buckle stalk be twisted to tighten the seat

belt against the belt path of the child restraint?

Do not twist the buckle stalk in a seating position

with an ALR retractor.

Frequently Asked Questions

WARNING!

Always make sure the head restraint is in its

upright position when the seat is to be used by

an occupant who is not in a child restraint.

Sitting in a seat with the head restraint in its

lowered position could result in serious injury or

death in a collision.

1 — Folded Headrest
2 — Child Restraint

22_RUVG_OM_EN_USC_t.book Page 209

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands