Chrysler Grand Caravan 2022 Owner'S Manual Download Page 243

Page: 243 / 316

IN CASE OF EMERGENCY

241

(Continued)

FCA US LLC recommends towing your vehicle with

all four wheels OFF the ground using a flatbed.
If flatbed equipment is not available, this vehicle

must be towed with the front wheels OFF the

ground (using a towing dolly, or wheel lift

equipment with the front wheels raised).
NOTE:

Ensure that the Electric Park Brake is released,

and remains released, while being towed.

Vehicle Recovery Tow Points
Your vehicle is equipped with Vehicle Recovery

Points that can be used to recover a disabled

vehicle, located on the underbody of the vehicle.
NOTE:



Ensure that the towing service tow hooks are

properly seated and secured in the attachment

points.



This recovery tow feature should be used by a

trained professional only.



Use approved receptacle location to free the

disabled vehicle from its environment.

Front Recovery Points

CAUTION!

Towing this vehicle in violation of the above

requirements can cause severe transmission

damage. Damage from improper towing is not

covered under the New Vehicle Limited

Warranty.

CAUTION!

Recovery feature:



Is to be used by a professional ONLY.



Is used only to provide recovery of the vehicle.



Is NOT to be used to recover secondary

vehicle.



Is NOT to be used for transporting the vehicle

over the road, i.e. “Flat Towing”.



Is to be used by a professional ONLY.



Is used only to provide recovery of the vehicle.



Is NOT to be used to recover secondary

vehicle.



Is NOT to be used for transporting the vehicle

over the road, i.e. “Flat Towing”.

22_RUVG_OM_EN_USC_t.book Page 241

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands