Chrysler Grand Caravan 2022 Owner'S Manual Download Page 140

Page: 140 / 316

138

STARTING AND OPERATING

7. Turn the ignition to the ON/RUN position, but

do not start the vehicle.

8. Press and hold the brake pedal.
9. Release the parking brake.
10. Turn the ignition OFF.
11. Release the brake pedal.

DRIVING TIPS

RIVING

LIPPERY

URFACES

Information in this section will aid in safe

controlled launches in adverse conditions.

Acceleration

Rapid acceleration on snow covered, wet, or other

slippery surfaces may cause the driving wheels to

pull erratically to the right or left. This phenomenon

occurs when there is a difference in the surface

traction under the front (driving) wheels.

Traction

When driving on wet or slushy roads, it is possible

for a wedge of water to build-up between the tire

and road surface. This is hydroplaning and may

cause partial or complete loss of vehicle control

and stopping ability. To reduce this possibility, the

following precautions should be observed:



Slow down during rainstorms or when the roads

are slushy.



Slow down if the road has standing water or

puddles.



Replace the tires when tread wear indicators

first become visible.



Keep tires properly inflated.



Maintain sufficient distance between your

vehicle and the vehicle in front of you to avoid a

collision in a sudden stop.

RIVING

HROUGH

ATER

Driving through water more than a few inches/

centimeters deep will require extra caution to

ensure safety and prevent damage to your vehicle.

Flowing/Rising Water

WARNING!

Rapid acceleration on slippery surfaces is

dangerous. Unequal traction can cause sudden

pulling of the front wheels. You could lose

control of the vehicle and possibly have a

collision. Accelerate slowly and carefully

whenever there is likely to be poor traction (ice,

snow, wet, mud, loose sand, etc.).

WARNING!

Do not drive on or across a road or path where

water is flowing and/or rising (as in storm

run-off). Flowing water can wear away the road

or path's surface and cause your vehicle to sink

into deeper water. Furthermore, flowing and/or

rising water can carry your vehicle away swiftly.

Failure to follow this warning may result in

injuries that are serious or fatal to you, your

passengers, and others around you.

22_RUVG_OM_EN_USC_t.book Page 138

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands