Chrysler Grand Caravan 2022 Owner'S Manual Download Page 60

Page: 60 / 316

GETTING TO KNOW YOUR VEHICLE

Dimmer Controls

The dimmer controls are part of the headlight

switch, and are located on the driver’s side of the

instrument panel.
With the parking lights or headlights on, rotating

the right dimmer control upward will increase the

brightness of the instrument cluster lights.

Rotating the left dimmer control will adjust the

interior light levels of the ambient lighting on the

instrument panel and doors.

Dimmer Controls

Dimmer Controls (Vehicles Sold In Canada Only)

At the top detent of the instrument panel dimmer

(parade mode), all the interior lights will illuminate.

At the bottom most setting (extreme bottom)

interior lights are turned off (dome off), and the

cluster, radio and instrument lighting go to their

lowest dimmable setting.

Parade Mode

(Daytime Brightness Feature)

Rotate the instrument panel dimmer control

upward to the first detent. This feature brightens

all text displays such as the odometer, instrument

cluster display, and radio when the position lights

or headlights are on.

WINDSHIELD WIPER AND WASHERS

The windshield wiper/washer controls are located

on the right side of the steering column. The front

wipers are operated by rotating a switch, located

on the end of the lever.

INDSHIELD

IPER

PERATION

The wipers and washers are operated by a switch

within the wiper lever. Rotate the switch at the end

of the lever upward, to the first detent past the

intermittent settings for low-speed wiper

operation. Rotate the switch at the end of the lever

upward to the second detent past the intermittent

settings for high-speed wiper operation. To turn the

windshield wipers off, rotate the switch within the

lever all the way down to OFF.

1 — Ambient Light Dimmer Control
2 — Instrument Panel Dimmer Control

22_RUVG_OM_EN_USC_t.book Page 58

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands