Chrysler Grand Caravan 2022 Owner'S Manual Download Page 85

Page: 85 / 316

GETTING TO KNOW YOUR INSTRUMENT PANEL

NSTRUMENT

LUSTER

ESCRIPTIONS

1. Tachometer



Indicates the engine speed in revolutions

per minute (RPM x 1000).

2. Instrument Cluster Display



When the appropriate conditions exist, this

display shows the instrument cluster

display messages

page 86.

3. Speedometer



Indicates vehicle speed.

4. Temperature Gauge



The temperature gauge shows engine

coolant temperature. Any reading within the

normal range indicates that the engine

cooling system is operating satisfactorily.



The gauge can indicate a higher tempera

ture when driving in hot weather or up

mountain grades. It should not be allowed

to exceed the upper limits of the normal

operating range.

5. Fuel Gauge



The gauge shows the level of fuel in the

fuel tank when the ignition switch is in the

ON/RUN position.



The fuel pump symbol points to

the side of the vehicle where the

fuel door is located.

NOTE:

The warning/indicator lights will illuminate for a

bulb check when the ignition is first cycled.

WARNING!

Driving with a hot engine cooling system could

damage your vehicle. If the temperature gauge

reaches “H” pull over and stop the vehicle. Idle

the vehicle with the air conditioner turned off

until the gauge drops back into the normal range

and is no longer red. If the gauge remains on the

“H”, turn the engine off immediately and call an

authorized dealer for service.

WARNING!

A hot engine cooling system is dangerous. You or

others could be badly burned by steam or boiling

coolant. You may want to call an authorized

dealer for service if your vehicle overheats

page 258.

22_RUVG_OM_EN_USC_t.book Page 83

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands