Chrysler Grand Caravan 2022 Owner'S Manual Download Page 147

Page: 147 / 316

MULTIMEDIA

145

Safety & Driving Assistance

After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:

Setting Name

Description

Forward Collision Warning Sensitivity — Located In Automatic Emergency

Braking Submenu

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Forward Collision Warning — Located In Automatic Emergency Braking

Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off”

setting will deactivate the FCW system. The “Warning Only” setting will provide

only an audible chime when a collision is detected. The “W Active

Braking” setting will provide an audible chime and apply some brake pressure

when a collision is detected.

Pedestrian Emergency Braking — Located In Automatic Emergency Braking

Submenu

This setting will turn the Pedestrian Emergency Braking system “Off” or to

“Warning & Active Braking”.

ParkSense — If Equipped

This setting will change the type of ParkSense alert when a close object is

detected. The “Sound Only” setting will provide an audible chime when an

object is detected. The “Sound and Display” setting will provide both an

audible chime and a visual display when an object is detected.

Rear ParkSense Volume — If Equipped

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist — If Equipped

This setting will turn the Rear ParkSense Braking Assist on or off.

Sliding Door Alert — If Equipped

This setting will turn the Sliding Door Alert on and off.

22_RUVG_OM_EN_USC_t.book Page 145

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands