Chrysler Grand Caravan 2022 Owner'S Manual Download Page 109

Page: 109 / 316

STARTING AND OPERATING

107

To Turn On The Engine Using ENGINE START/STOP

Button
1. The transmission must be in PARK or

NEUTRAL.

2. Press and hold the brake pedal while pushing

the ENGINE START/STOP button once.

To release the parking brake manually, the ignition

switch must be in the ON/RUN position. Press on

the brake pedal, then push the parking brake

switch momentarily.

If the driver shifts into PARK while moving, the

vehicle may Park.
PARK will engage ONLY when vehicle speed is

1.2 mph (1.9 km/h) or less.
The message “Vehicle Speed is Too High to Shift to

P” will display in the instrument cluster display if

vehicle speed is above 1.2 mph (1.9 km/h). The

gear position indicator will blink continuously until

the gear selector is returned to the proper position,

or the requested shift can be completed.

OLD

EATHER

PERATION

ELOW

–22°F O

−30°C)

To ensure reliable starting at these temperatures,

use of an externally powered electric engine block

heater (available from an authorized dealer) is

recommended.

FTER

TARTING

— W

ARMING

NGINE

The idle speed is controlled automatically and it

will decrease as the engine warms up.

NGINE

AILS

TART

CAUTION!

Damage to the transmission may occur if the

following precautions are not observed:



Shift into or out of PARK or REVERSE only after

the vehicle has come to a complete stop.



Do not shift between PARK, REVERSE,

NEUTRAL, or DRIVE when the engine is above

idle speed.



Before shifting into any gear, make sure your

foot is firmly pressing the brake pedal.

WARNING!

If vehicle speed is not below 1.2 mph (1.9 km/h)

when the driver shifts into PARK, the

transmission will default to NEUTRAL until the

vehicle speed drops below 1.2 mph (1.9 km/h)

and the above conditions are met, enabling

AutoPark. A vehicle left in the NEUTRAL position

can roll. As an added precaution, always apply

the parking brake when exiting the vehicle.

WARNING!



Never pour fuel or other flammable liquid into

the throttle body air inlet opening in an

attempt to start the vehicle. This could result

in flash fire causing serious personal injury.



Do not attempt to push or tow your vehicle to

get it started. Vehicles equipped with an auto

matic transmission cannot be started this

way. Unburned fuel could enter the catalytic

converter and once the engine has started,

ignite and damage the converter and vehicle.



If the vehicle has a discharged battery,

booster cables may be used to obtain a start

from a booster battery or the battery in

another vehicle. This type of start can be

dangerous if done improperly

page 234.

22_RUVG_OM_EN_USC_t.book Page 107

Summary of Contents for Grand Caravan 2022





























































































































































































































































































































Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands

Chrysler Grand Caravan 2022, Owner'S Manual

Search results

Summary of Contents for Grand Caravan 2022

Reviews:

Related manuals for Grand Caravan 2022

Brands by name

Popular brands