Cantek KQ0824 Series, User Manual

Page: 21 / 215

21
2.2.3 HD-SDI Input Signal detection
A, B, C and D Type

These type of DVRs will automatically detect the input signals from 720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50, 1080I 60,
1080P 24, 1080P 25, 1080P 30, 1080P 50, 1080P 60 (Auto Detection) when the system starts.

720P and 1080P HD-SDI inputs can be used simultaneously without any restriction on different channel.

1080I input cannot be used simultaneously with 720P and/or 1080P.
CAUTION
When 1080I is connected to DVR, digital zoom is not supported on the Live Screen.
E and F Type

This type of DVR will selects the input signals from 720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50, 1080I 60, 1080P 24, 1080P
25, 1080P 30, 1080P 50, 1080P 60 (Manual Selection) when the system starts.

All HD-SDI inputs can be used simultaneously without any restriction on different channel.
2.2.4 Monitor Connections (Video Out, VGA and Spot)
 Use with CCTV monitor and computer monitor. Please connect the CCTV monitor to ‘ VIDEO OUT’(except for A, B, C and
D Type) , the computer
monitor to ‘
VGA
’, respectively. If necessary, connect another CCTV monitor to ‘
SPOT
’
2.2.5 HDMI connections

Connect HDMI cable to HD out port of rear panel and HDMI port of HD output device.

Please click (

) SETUP> DISPLAY> VGA and the following screen will appear.

If user wishes to hear audio via HDMI cable, check the box HD Audio Output

Click the box below to select resolution.
-
User can select the resolution among ‘1920x1080 RB’, ‘1920x1080’, ‘1680x1050 RB’, ‘1680x1050’, ‘1280x1024’, and
‘1024x768’
-
The default setting of DVR is ‘1280 x 1024’.
2.2.6 Audio Connections
 Connect an audio device to ‘
AUDIO IN
’ and a speaker system to ‘
AUDIO OUT
’. Please use a speaker system with volume
adjustable.
2.2.7 TCP/IP(Ethernet) Connections
 Connect to ‘
ETHERNET
’ connector with the LAN cable.

When connect to Internet, use an ordinary LAN cable (Non-cross cable). However, when connect directly to a PC, please
use only ‘Crossover cable’.