20
CAUTION
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may cause permanent
damage to the HDD (DVD-RW).
Installation/Addition/Moving/Replacement:
User should start ‘HDD initialization’ including formatting. Otherwise, DVR won’t recognize
the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.
①
(Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time)
②
(Initialization of system setup) All values in setup are restored to factory default settings
-
(SETUP>SYSTEM>Information>Status>Setup>Default)
③
(HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs, each must be
formatted, separately. When the format is completed, DVR will auto-reboot.
Removal:
Follow the Remove procedure even when a pre-installed hard disk has been removed. In
-
SETUP>SYSTEM>Admin>Storage>Format, click (
) ‘Removed’ item under the discrete Format headings of a corresponding HDD to
discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.
2.1.4 Maximum HDD Capacity
Each model has a different HDD capacity recognition.
Below table shows the recommended maximum HDD capacity for each model.
Model
A type
B type
C type
D type
E type
F type
Capacity
3TB
16TB
16TB
16TB
16TB
16TB
2.1.5 DVD-RW installation
Securely fix DVD-RW by using bracket and screws provided herewith.
Please do not use any different DVD-RW cables (data cable and power supply cable) other than the ones we provide.
Otherwise, it may cause damage to the DVD-RW.
Only one DVD-RW can be used. Mount it at the SATA 3 port (B Type) or SATA 4 port (C (4CH), D, E and F type). For C
(8/16CH) type
, users should mount it at the
SATA 5 port
.
CAUTION
Install DVD-RW hard disk after DVR power off. Otherwise, it may cause permanent damage to the hard disk. To turn off DVR, please click (
)
SETUP>SYSTEM>Shutdown. Also, wait for 5 seconds before plugging in power supply again.
2.2 Connector Wiring
2.2.1 Video-In/Loop Out Connections
A, B and C Type
Connect cameras
to ‘
HD-SDI IN
’ to channel 1 to 16.
F Type
Connect cameras
to ‘
HD-SDI IN
’ to channel 1 and 2.
Connect cameras to
‘VIDEO IN’ to channel 3 to 16.
If user wishes
to link camera input to another device, please connect the camera to ‘
LOOP OUT
’
Assure the ‘
VIDEO IN
’ and ‘
LOOP OUT
’ connections are connected properly, not oppositely.
NOTE
Only F
Type
model supports LOOP OUT connection.
2.2.2 HD-SDI Camera Input Format
HD-SDI recorder shall recognize following HD-SDI signals
-
720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50, 1080I 60, 1080P 24, 1080P 25, 1080P 30, 1080P 50 and 1080P 60.
Summary of Contents for KQ0824 Series
