Cantek KQ0824 Series, User Manual

Page: 118 / 215

118
7.7.2.1 Full Screen On
 Click “Full Screen On” to make selected channel into a full screen after right mouse click on the screen.
 Click “Full Screen Off” to exit the full screen after right mouse click on the full screen mode.
7.7.2.2 Auto Sequence

Users are able to set the auto sequence.

When user set the
“Auto Sequence” display mode, screen will change to 1 channel display mode and
channel will be changed by user
’s setup. For more information Please refer chapter 7.4.2.6.
7.7.2.3 Instant Playback

Instant playback is available in both Live1 and Live2 pane, but screen capture is available in either live1 or live2.
 After right mouse click, move the mouse cursor to “Instant Playback”. Then, play and setup menu will appear.
-
Play: The recorded video of the pre-setup time will be displayed in the playback viewer.
-
Setup: The time of instant playback can be setup in this menu, from 1minute to 3hours.
(1Min, 3Min, 5Min, 10Min, 15Min, 30Min, 1Hour, 3Hour. The default time is 3Min.)