Cantek KQ0824 Series, User Manual

Page: 35 / 215

35

If
“Use on” box is unchecked, Beep, Blink Message will be unchecked automatically. Only when “Use on” is checked 
, user
can set Beep, Blink Message function.

Click (

) Inspection Time frame to set inspection time.

Click Check by frame to select inspection interval.

Last Check Time: show the time of the last inspection.

Click (

) ▲, ▼ direction buttons on the right-hand side of Temperature frame to adjust to maximum temperature for the
HDD used in DVR. In general, it is 55
℃
.

Click (
 ) ▲, ▼ direction buttons on the right-hand side of HDD Damage frame to set the permissible level of HDD damage
(%). HDD is a very crucial element for DVR recording, so set the permissible level within 1% to 2% to assure maximum
safety.
-
While pressing (+) or (-) button on the rightmost side of Temperature or HDD Damage item, a target value increases or
decreases by 10 units.
 Choose ‘OK’ to confirm the setting.
4.2.3 Account

Please click (

) SYSTEM>Account and the following screen will appear.

Please click (

) New Group and the following screen will appear.

Click (

) keyboard icon on the right-hand side of Group Name frame. Then, the virtual keyboard will show. Please click (

)
desired characters (up to 8 characteristics) on the virtual keyboard.

Do provisioning for Group Name by selectively checking

some of the following items (Setup, Search, Network, Archiving
and Shut Down).
 Choose ‘OK’ to confirm the setting.

Please click (

) Login Settings and the following screen will appear.

Selectively enable password protection for important operations (Setup, Search, Network, Archiving and Shut Down).

Please check

the operations that wish to enable password protection.
CAUTION
USER WILL NOT BE ASKED TO ENTER YOUR PASSWORD FOR OPERATION(S) WHERE PASSWORD PROTECTION IS NOT
ENABLED.
Login Setting
New Group