Cantek KQ0824 Series, User Manual

Page: 206 / 215

206
14.2.5 Service

If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.
14.2.6 System Dimension Diagram
14.2.7 Connector Wiring
14.2.7.1 HD-SDI In/Out and HDMI In/Out Connections

Connect a
‘HD-SDI OUT’
of HD-SDI device to
‘HD-SDI IN’
of HSC 1200 using by 75ohm coaxial cable

Connect a
‘HDMI OUT’
of HSC 1200 to
‘HDMI IN’
of device with HDMI output using by HDMI cable
’
14.2.7.2 Video Component Input

If users wish to link video component input (e.g. Divx, etc), assure that video component input and
“COMPONENT IN”
connections are connected properly with same colors.
14.2.7.3 Power Supply Connections

Plug the power supply adapter (DC 12V, 3.33A)
which is included in this product to ’
DC12V
’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
14.2.8 Cable

75 ohm coaxial cable

HDMI cable

VGA cable
NOTE
The cables above are not included in the package.