Cantek KQ0824 Series, User Manual

Page: 215 / 215

215
14.6.7.1 HD-SDI in Connections

Connect HD-SDI Camera to
‘HD-SDI IN’
of HFO1100 using 75 ohm coaxial cable
14.6.7.2 Fiber Optic Out Connections

Connect the
“LC Fiber Optic out” of HFO1100 which can be connected to opposite site of Fiber optic converter (HFO 1200)
by using the fiber optic cable.
14.6.7.3 Fiber Optic in Connections
 Connect the fiber optic cable which is coming from the opposite site of HFO1100 to “LC Fiber Optic In” of HFO 1200.
14.6.7.4 HD-SDI out connections

Connect the
‘HD-SDI OUT’
of HFO 1200 to
‘HD-SDI IN’
of HD-SDI device by using 75ohm coaxial cable.
14.6.7.5 Power Supply Connections

Plug the power supply adapter (DC 12V, 3.33A) which is included in this pro
duct to ’
DC12V
’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
14.6.8 Cable

75 ohm coaxial cable is needed

Fiber Optic Cable
NOTE
The cables above are not included in the package.
14.6.9 Display
14.6.9.1 LEDs
KEYS Operating mode
Power LED
(Red)
• Light off: Converter off
• Light on: Converter on
Connection LED
(Green)
• Light off: Not connected
• Light on: Connected