Cantek KQ0824 Series, User Manual

Page: 48 / 215

48
4.4.5 Alarm Out

Please click (

) DEVICES>Alarm Out and the following screen will appear.

The Alarm Out menu will allow user to give title and to select the type and duration of Alarm output.

Click (

) the keyboard icon on the right-hand side of each frame on Title column and the virtual keyboard will appear. Then,
please register the title of Alarm output.

When a check box is marked

on No column, a corresponding Alarm output starts operating. However, if user does not
check the check box, the operation stops.

Click (

) each frame on Type column to select type of a corresponding Alarm output.
-
NO: contact is normally open (Normally open)
-
NC: contact is normally closed (Normally closed)

User may change the type and duration of all Alarm output at a time by clicking the Type and Duration box on the menu tab.
 Choose ‘OK’ to confirm setting.
4.4.6 Serial In
NOTE
Please refer to “14 Serial In”.
4.5 RECORD

Please click (

) RECORD and the following screen will appear.