Cantek KQ0824 Series, User Manual

Page: 54 / 215

54

Repeat the procedure for Camera Nos. 2 to 16. If user wants every camera to have the same mode, please click (

) Copy
to All Camera.

Below lists symbols of the respective recording modes.
Continuous
Alarm In
Alarm In / Continuous
Alarm In / PreAlarm
Motion
Motion / Continuous
Motion / PreAlarm
Motion / Alarm In
Motion / Alarm In / Continuous
Motion / Alarm In / PreAlarm
 Choose ‘OK’ to confirm the setting.
NOTE
Holiday (H) registration is done with a separate menu.
4.5.3 Pre Alarm

Please (

) RECORD>Pre Alarm and the following will appear.

Pre Alarm is effectively used when user selected recording mode by Alarm or Motion.

The Pre Alarm will allow user to check, during playback, the previously recorded video before the record start time.

Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. User cannot change camera titles
here.

Click (

) each frame on Resolution column to select recording resolution of a corresponding camera. User may select one
of 360x 240(288), 720x240(288), 720x480(576), 1280x720 and 1920x1080

Click (

) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.