Cantek KQ0824 Series, User Manual

Page: 197 / 215

197
13.4.2 Schedule Setup
 Click “Record>Schedule>” then shows as below.

Tick the box
(□) item Alarm In.

Click the Time/Date that wishes to activate ATM/POS function on schedule.

It is possible to activate all the time by clicking top-right side of table.

Click
“OK” to save the schedules.
NOTE
Please do not select the Alarm In and Motion simultaneously on schedule setup.
Otherwise, POS/ATM text will be displayed improperly.
13.5 Setup

Please click (

)
“System>Devices>Serial-In”, then user will see the display below.
13.5.1 Title

Click
“Title” item then virtual keyboard will appear.

Input the title then click (

) to save.
13.5.2 Port Setting

Press (

)
the “Port Setting” button in order to set up the port. Default values are Baud rate 2400 bps, Data Bit 5 bit, Stop Bit
1 bit, Parity None.