Cantek KQ0824 Series, User Manual

Page: 69 / 215

69
5.8 Color Control and Position

Please click (

) Color /Alarm in SEARCH menu and the following input box will appear.
NOTE
THIS FUNCTION IS ENABLED ONLY WHEN LIVE MODE AND 1 CHANNEL MODE

If user clicks ( Default ),
proper number of Color Control or HSTART/VSTART will appear automatically. Please choose ‘OK’
to confirm the setting.

Click (
 ) ▲, ▼ direction buttons on the right-hand side of Brightness/Contrast/Saturation to set adjust color of the screen
(i.e. 0 ~ 255)

Click (

) ▲, ▼ direction buttons on the right-hand side of HSTART / VSTART to set adjust display poison.

If user wants every camera to have the same mode, please click (

) Copy to All Camera.
 Choose ‘OK’ to confirm the setting.
NOTE
This function is enabled only when Live and Full Screen Mode. (Only A,B, C, D, E, F and L type has this function)
5.9 Alarm Out Control

Please click (

) Color / Alarm in SEARCH popup menu or in front panel and the following input box will appear.
NOTE
THIS FUNCTION IS ENABLED ONLY WHEN LIVE MODE AND 4 SPLIT SCREEN MODE OR HIGHER .
NOTE
ONLY 4 ALARM CONTROLS ARE AVAILABLE FOR TYPE B,D AND G.

Please click (

) Color / Alarm in SEARCH popup menu or in front panel and the following input box will appear.
 Choose ‘Close’ to confirm the setting.
CAUTION
ALTHOUGH USERS TURN ITS SYSTEM SETTING TO DEFAULT, THE ANALOG OUTPUT WILL STAY PREVIOUS OUTPUT METHOD
AND NOT EFFECT BY THE DEFAULT SETTING.