Cantek KQ0824 Series, User Manual

Page: 198 / 215

198

When the setup is done, press enter (

) to save the setting.
13.5.3 OSD Display

OSD items are to decide whether to display the information from the serial port connected to the rs232 port on OSD screen.

They have 4 menus as followings:
-
None: displays nothing on the OSD screen.
-
Live: displays incoming information from the serial port in real time on the OSD screen.
-
Playback: displays the saved information on the OSD screen during replay.
-
Both: displays all the information on both Live and Playback mode.
13.5.4 Pattern Setting

User can select the name of serial device if click (

) the keyboard button of Title.

When “Use” items of Numbers 1-4 are checked

on Serial-In page, it receives the data from the applicable serial device.

Check

the
“Auto” item so as to capture automatically all the data which includes unnecessary dummy data out of serial
device as below.

Analyze among the automatically captured data which will be displayed or discarded then enter Pattern Setting.
-
Unless user checks
“Auto” item, make sure to set up “Start Pattern” and “End Pattern”
- “Discard Pattern”, “Line Delimiter” and “MCPL” are utilized independently, not relation to “Auto” mode.

It is possible to input and analyze the serial data by clicking “Pattern” after tick the “Auto” box(□) off.

Each item explains below:
-
Start Pattern: Indicates the beginning of the new data when new designated data are received from a serial device.
-
End Pattern: Indicates the end of the data when designated data are received from a serial device.
-
Discard Pattern: Does not show the designated data on OSD screen. Sets up in order to designate dummy data or