Canon iR5570 Series Manual Download

Page: 399 / 508

Making a Copy with Two-Page Separation and Different Size Originals Settings (Scan Originals)

7-57

ing th

Exp

ress

sic F

eatures

Scre

Copying while Verifying Scanned Images (Scan Image
Check)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Scan
Image Check," on p. 4-67.

IMPORTANT

•

The Scan Image Check mode can not be used with the Remote or Cascade Copy, 2 2-Sided, 2

1-Sided, Book 2-Sided, Two-page separation, Image Combination, Booklet, Transparency

Interleaving, Image Repeat, or Form Composition modes.

•

When 1 2-Sided is set, two-sided copying is not performed and the machine copies each original at a
time.

•

The originals must be set on the platen glass. You cannot copy using Scan Image Check mode with the
originals set in the Feeder.

Press [Scan Originals].

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 57 Tuesday, May 24, 2005 12:12 PM

Summary of Contents for iR5570 Series





























































































































































































































































































































































































































































































































Search results

Summary of Contents for iR5570 Series

Reviews:

Related manuals for iR5570 Series

Brands by name

Popular brands

Canon iR5570 Series, Manual

Search results

Summary of Contents for iR5570 Series

Reviews:

Related manuals for iR5570 Series

Brands by name

Popular brands