manualshive.com logo in svg

Canon iR5570 Series, Manual

Share
Download
Canon iR5570 Series Manual Download Page 302

Page and Copy Set Numbering

4-84

4

Spec

ial 

Co

p

y

ing and M

a

il Bo

x F

e

atu

res

Page and Copy Set Numbering

This mode enables you to print page numbers, copy set numbers, and user-defined text onto 
the output.

IMPORTANT

 

•

The Page Numbering mode cannot be used with the following mode(s).
- Copy: Saddle Stitch, Entire Image, Shift (No. Key Entry), Transparency Interleaving, Frame Erase, 

Mirror Image, Form Composition

- Mail Box: Saddle Stitch, Form Composition

•

The Copy Set Numbering mode cannot be used with the following mode(s), in addition to the modes 
mentioned above.
- Copy: Group, Rotate Group, Offset Group, Booklet
- Mail Box: Group, Rotate Group, Offset Group, Booklet

•

For the Mail Box function, the Page/Copy Set Numbering mode cannot be used with documents whose 
resolution is other than 600 x 600 dpi.

•

Printing/Copying performance may not be optimal in the Page/Copy Set Numbering mode, depending 
on the scanned original and combination of copy modes.

NOTE

 

•

The procedure for printing documents from an inbox is the same for copying.

•

You can also adjust the position of the page numbers. (See Chapter 4, "Customizing Settings," in the 
Reference Guide.)

•

If you select [Numbered Chapters] in combination with the Cover/Sheet Insertion (Sheet Insertion. 
Chapter Page, or Tab Paper) mode or the Cover/Job Separator mode (for the Mail Box function), the 
chapter numbers are counted as follows:
- Copy: After each chapter page or tab paper is inserted

      After each sheet insertion (left blank) is inserted

- Mail Box: After each sheet is inserted

•

If the Scan Image Check mode is used with the Copy Set Numbering mode, the number is copied as 
"XXXXX."

•

If the copy number has fewer than five digits, the machine copies it as follows:
- Example:  If the copy number is 10, "00010" is printed.

•

If the Page Numbering mode is used with the Cover/Sheet Insertion or Cover/Job Separator mode (for 
the Mail Box function), page numbers are not printed on the inserted pages.

iR6570_CMB_Upgrade_ENG_Post_Final.book  Page 84  Tuesday, May 24, 2005  12:12 PM

Summary of Contents for iR5570 Series





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands