manualshive.com logo in svg

Canon iR5570 Series, Manual

Share
Download
Canon iR5570 Series Manual Download Page 408

Making a Copy with the Booklet, Shift Settings (Book/Page Edit/Shift)

7-66

7

U

s

ing th

e 

Exp

ress

 C

o

p

y

 Ba

sic F

eatures

 Scre

en

 

Making Copies for Use as a Booklet (Booklet)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Booklet 
Mode," on p. 4-27.

IMPORTANT

 

•

The Booklet mode cannot be used with the Stack Bypass Settings (2nd Side of 2-Sided Page), Entire 
Image, Automatic Paper Selection, Finisher, Two-Sided, Two-page Separation, Front Cover/Back Cover, 
Paper Insertion, Image Combination, Shift (No. Key Entry), Transparency Interleaving, Margin, Different 
Size Originals, Frame Erase, Image Repeat, Mirror Image, Form Composition, Tab Paper Creation, 
Scan Image Check, Page Numbering/Copy Set Numbering, or Watermark/Print Date mode.

•

The Divided Booklet mode cannot be used together with the Remote or Cascade Copy mode, in 
addition to the above-mentioned modes.

•

Saddle stitching is not performed when there is only one sheet.

•

Saddle stitching can be performed only if the optional Saddle Finisher-T2 is attached.

•

The accuracy of folds created in the Saddle Stitch mode may vary, depending on the paper type and the 
number of sheets.

1

Press [Book/Page Edit/Shift].

iR6570_CMB_Upgrade_ENG_Post_Final.book  Page 66  Tuesday, May 24, 2005  12:12 PM

Summary of Contents for iR5570 Series





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands