manualshive.com logo in svg

Canon iR5570 Series, Manual

Share
Download
Canon iR5570 Series Manual Download Page 35

Selecting an Output Device (Select Output Device)

1-21

1

Introdu

ction to 

th

e C

o

p

y

 Func

tions

NOTE

 

•

In order for a device to be selected as a remote output device used for remote copying, it must be stored 
in the Register Remote Device in the Copy Settings (from the Additional Functions screen). (See 
"Specifying the Remote Copy Printer Settings," on p. 8-19.)

•

For cascade copying, the Paper Select screen of this machine is displayed. Select the paper drawer on 
the machine that is loaded with the same paper size as the remote copy printers.

•

To copy the original on this machine and another remote copy printer on the network at the same time 
(cascade copying), the number of copies set for this machine and the number of copies set for the 
remote copy printer are split in half and printed. If an odd number of copies is set, the machine you are 
copying from will print one additional copy.

•

If you select a remote copy printer before performing cascade copying, you cannot select copy settings 
that are not supported by the remote copy printer. Also, if the finishers attached to this machine and the 
remote copy printer are different, the finisher settings can only be set to Collate and Group modes.

•

When one remote copy or one cascade copy job is in progress, it is not possible to schedule another 
remote copy or cascade copy job.

•

For the selected remote copy printer, set the same Department ID and password as this machine. (See 
Chapter 6, "System Manager Settings," in the Reference Guide.)

•

When one remote copy or one cascade copy job is in progress, if an error occurs in the remote copy 
printer, an error message is displayed on the Job/Print monitor area of the touch panel display of this 
machine and the remote copy printer.

iR6570_CMB_Upgrade_ENG_Post_Final.book  Page 21  Tuesday, May 24, 2005  12:12 PM

Summary of Contents for iR5570 Series





























































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands