Canon iR5570 Series Manual Download Page 326

Page: 326 / 508

Memory Keys

5-6

●

If you select a key that already has settings stored in it:

❑

A screen appears, asking for your confirmation to overwrite the previous settings. Press
[Yes].

To cancel overwriting the settings, press [No].

The message <Stored in memory.> appears for approximately two seconds on the touch
panel display.

The stored settings are displayed.

Press [Cancel].

NOTE

You can assign a name to the memory key by pressing [Register Name].

Naming a Memory Key

On the Special Features screen, press [Mode Memory].

Select a key ([M1] to [M9]) to name

➞

press [Register Name].

NOTE

•

Keys that already have settings stored in them are displayed with a coloured triangle ( ) in the
lower right corner of the key.

•

If you select a key that already has settings stored in it, the settings are displayed.

•

You can also name keys with no settings stored in them.

•

If there are more stored copy settings than are currently displayed, you can scroll through the list
by pressing [

] or [

iR6570_CMB_Upgrade_ENG_Post_Final.book Page 6 Tuesday, May 24, 2005 12:12 PM

Summary of Contents for iR5570 Series





























































































































































































































































































































































































































































































































Search results

Summary of Contents for iR5570 Series

Reviews:

Brands by name

Popular brands

Canon iR5570 Series, Manual

Search results

Summary of Contents for iR5570 Series

Reviews:

Brands by name

Popular brands