manualshive.com logo in svg

Canon imageCLASS MF5850dn, Basic Operation Manual

Share
Download
Canon imageCLASS MF5850dn Basic Operation Manual Download Page 238

11-11

M

ain
tenanc

e 

Replacing the Toner Cartridge

7

 

Place the toner cartridge on a flat surface, 

fold back the tab of the sealing tape (A) 

located at left side of the toner cartridge, 

then pull the seal completely out.

If toner is adhered on the removed seal, be 
careful that your hands or clothes do not get 
dirty from touching the toner.

If your hands or clothes get dirty from touching 
the toner, wash them immediately in cold 
water. Do not use hot water. If you do, the toner 
may be set permanently.
Do not pull the seal out at an angle.

–

–

–

8

 

Align the toner cartridge to the guides in 

the machine and slide the cartridge 

completely into the machine until it 

stops.

9

 

Close the front cover.

If you cannot close the front cover, do not force it 
to close. Open the cover and make sure the toner 
cartridge is properly set in the machine.

Summary of Contents for imageCLASS MF5850dn















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands