Canon EOS C300 Mark III Manual Download Page 187

Page: 187 / 254

187

Browser Remote: Controlling the Camera from a Network Device

[

Activate] button

Touch the button to give priority to the metadata entered in this screen when recording clips. This overrides

the metadata read from a file saved on the SD card.

[Overwrite Previous] button

After recording a clip: Touch [Overwrite Previous] to send the metadata entered in this screen to the camera,

replacing any metadata embedded in the last clip recorded.

[Apply from Next] button

Touch the button to send the metadata entered in this screen to the camera so it is embedded only with clips

that are recorded after the transfer. This option does not overwrite the metadata of clips already recorded or

being recorded.

[Overwrite] button

While recording: Touch [Overwrite] to send the metadata entered in this screen to the camera, replacing any

metadata that the clip being recorded might have.

[Clear All] button

Touch to delete all the data entered.

NOTES

• The metadata sent to the camera from Browser Remote will be lost in the following cases.

- The camera is turned off.
- The

[

Recording/Media Setup] > [Metadata] > [Setting] setting was changed.

• Using Browser Remote ([ Activate] button) you can give priority to metadata sent from the application.

However, you cannot return the priority back to the SD card. To use a user memo file saved on a card you will

need to set

> [

Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on the camera itself.

• If you use Browser Remote to transfer user memo information to a relay clip after the switch, the user memo

will not be saved to the clip recorded before the camera switched cards.

Summary of Contents for EOS C300 Mark III































































































































































































































































Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands

Canon EOS C300 Mark III, Manual

Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands