Canon EOS C300 Mark III Manual Download Page 25

Page: 25 / 254

Preparations

Preparing the Power Supply

You can power the camera using a battery pack or the DC IN 12V terminal. Even when a battery pack is

attached, if a power source is connected to the DC IN 12V terminal, the camera will not draw power from the

battery pack.

Using a Battery Pack

You can power the camera using the supplied BP-A60 Battery Pack or the optional BP-A30 Battery Pack. Both

battery packs are compatible with Intelligent System so you can check the approximate remaining battery usage

time (in minutes) on the screen. For more accurate readings, when using a battery pack for the first time, charge

it fully and then use the camera until the battery pack is completely depleted.

Charging the Battery Pack

Charge battery packs using the supplied CG-A20 Battery

Charger and CA-CP200 B Compact Power Adapter. Before

charging, remove the terminal cover of the battery pack.
1 Connect the compact power adapter to the battery charger

and plug the power cord into a power outlet.

2 Attach the battery pack to the battery charger.

• Press lightly and slide the battery pack in the direction of the

arrow until it clicks.

• The CHARGE indicator starts flashing and also indicates the

battery pack’s approximate charge. The indicator will stay on

when charging has completed.

approx. 0% to 49%: Flashes once every 2 seconds
approx. 50% to 74%: Flashes twice every 2 seconds
approx. 75% to 99%: Flashes 3 times every 2 seconds

3 Disconnect the compact power adapter from the battery charger and unplug the power cord.
4 Remove the battery pack from the battery charger.

IMPORTANT

• Do not connect to the battery charger any product that is not expressly recommended for use with this

camera.

• When using the battery charger or compact power adapter, do not fix it permanently to one place as this may

cause a malfunction.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied battery charger or

compact power adapter to voltage converters for overseas travels or special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

CHARGE

indicator

Compact power adapter

Battery Charger

Summary of Contents for EOS C300 Mark III































































































































































































































































Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands

Canon EOS C300 Mark III, Manual

Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands