background image

11

Supplied Accessories

Before Using the Camera

• Before making important recordings for the first time, make test recordings using the video configuration(s) you 

plan to use to check that the camera operates correctly. Should it fail to operate correctly, refer to 

Troubleshooting

 (

A

212).

Copyright notice: 

Unauthorized recording of copyrighted materials may infringe on the rights of copyright 

owners and be contrary to copyright laws.

Notes on privacy and publicity rights regarding the use of video:

 When using the camera, exercise proper caution 

in order to protect privacy and avoid any violation of publicity rights. 

About the LCD screen:

 The screen is produced using extremely high-precision manufacturing techniques, with 

more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or light up 

permanently. This has no effect on the recorded image and does not constitute a malfunction.

IMPORTANT

• CFexpress cards can become hot due to the high operating temperature inside the camera. Removing a 

CFexpress card immediately after using it for recording may cause burns or cause you to drop the card, 

resulting in damage to the card.

• Observe the following precautions while an access indicator (

A

44, 45) is illuminated or flashing in red. Failing 

to do so may result in permanent data loss.
- Do not turn off the camera and do not remove the battery or other power source.
- Do not open the card compartment cover.

Summary of Contents for EOS C300 Mark III































































































































































































































































Reviews: