Canon EOS C300 Mark III Manual Download Page 110

Page: 110 / 254

Video Scopes

110

Options for [Type]

[Line]:

Sets the waveform monitor to line display mode.

[Line+Spot]:

The waveform of the area in the red frame is displayed in red on top of the [Line] mode

waveform.

[Select Line]: The selected horizontal line (in red) will be displayed along with its waveform.
[RGB]:

Shows 3 side-by-side waveforms in an RGB parade.

[YPbPr]:

Shows 3 side-by-side waveforms in a YPbPr parade.

Options for [Vertical Scale for HDR]

[IRE]:

Displays the video scope in IRE units.

[PQ/HLG]:

For HDR-PQ images, displays the video scope in nits (cd/m

) (including when the gamma curve

after applying the Look File is set to [PQ]). For such images, the narrow range’s (video range)

waveform monitor is displayed.

For HDR-HLG images, the Y axis shows a relative-index value between 0.0 and 1.0. (including

when the gamma curve after applying the Look File is set to [HLG]).

Configuring the Vectorscope

1 Select

> [

Assistance Functions] > [WFM Function] > [Vectorscope].

2 Select

> [

Assistance Functions] > [Vectorscope Settings] > [Type] > [Normal] or [Spot].

3 Select

> [

Assistance Functions] > [Vectorscope Settings] > [Gain] > [1x] or [2x].

Options for [Type]

[Normal]:

Displays the usual vectorscope.

[Spot]:

The color signal of the area in the red frame is displayed in red on top of the [Normal] mode

waveform.

NOTES

• The waveform monitor will not be affected even if a LUT is applied to the image, the range is changed or

anamorphic desqueeze is used on the selected video output or screen.

• If the [Knee] settings in the custom picture file (

132) were changed, a horizontal line will appear on the

waveform monitor indicating the luminance (Y) level* corresponding to the knee point.

* When a Look File registered to the custom picture file is active, the displayed luminance may not be at the correct level.

• When the waveform monitor’s Y axis is set to display in IRE units, a level of 10 bit 64 maps to 0 IRE and 10 bit

940 maps to 100 IRE, regardless of the custom picture settings.

Summary of Contents for EOS C300 Mark III































































































































































































































































Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands

Canon EOS C300 Mark III, Manual

Search results

Summary of Contents for EOS C300 Mark III

Reviews:

Related manuals for EOS C300 Mark III

Brands by name

Popular brands