Canon EOS 5D MARK IV, Instruction Manual

Page: 659 / 676

W-45
Saving Images

If necessary, also read “NFC Function Cautions” (p.W-17).

While saving images, a picture cannot be taken even if the camera’s
shutter button is pressed.

Do not drop the camera on Connect Station or touch the camera to it with
too much force. Doing so may damage Connect Station’s internal hard
disk.

If the camera is not recognized right away, try holding it close to Connect
Station and slowly moving it or rotating it horizontally.

Just holding the camera close to Connect Station may not establish a
connection. In such a case, gently touch Connect Station with the
camera.

When holding the camera close to Connect Station, do not leave
anything between the camera and Connect Station. In addition, when a
case is attached to the camera, communication may not be possible via
NFC function.

If the camera and Connect Station are moved too far away from each
other while saving images, saving may take time or the connection may
be terminated.

If the camera’s battery runs out while saving images, saving will stop.
Charge the battery, then try again.

4K movies cannot be played back with Connect Station.

When all images are already saved, saving will not be performed. In
such a case, select [
OK ] to terminate the connection.

When there are a large number of images on the memory card, it may
take time to check and save the images.

While saving images, the camera’s auto power off does not function.